|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness 3/4 in #8 x 1-1/4 in sheet metal screw. Accommodates loads to 75 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.
|
Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6 to #8 Dia screws of any length. Up to 50 lb load capacity. Drills directly into drywall or wood studs. Zinc die-cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4 in sheet metal screw; Maximum fixture thickness - 3/4 in. Removable. Applications - closet organizers, electrical fixtures, curtain rods, HVAC fixtures, plumbing fixtures, light shelving and supports, Signs.
|
The FlipToggle? anchor's strong toggling mechanism supplies extra holding power in drywall, plaster or hollow concrete blocks. Its main feature is its ability to be installed in thicker hollow wall material, up to 3 in thick. Its simple and effective tilting mechanism ensures a trouble-free installation every time and is twice as strong as the regular toggle bolt of the same bolt diameter. The FlipToggle? requires a 1/2 in hole regardless of its diameter and can be used with any bolt length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shorter length great for shallow walls. White color blends with white walls. Non-conducive/non-corroding nylon. Maximum fixture thickness 3/4 in. #6 x 1-1/4 in sheet metal screw. Accommodates loads to 30 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications -Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
The FlipToggle? anchor's strong toggling mechanism supplies extra holding power in drywall, plaster or hollow concrete blocks. Its main feature is its ability to be installed in thicker hollow wall material, up to 3 in thick. Its simple and effective tilting mechanism ensures a trouble-free installation every time and is twice as strong as the regular toggle bolt of the same bolt diameter. The FlipToggle? requires a 1/2 in hole regardless of its diameter and can be used with any bolt length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
The Nylon Toggle? is made of resistant nylon with wings that expands behind the drywall. It is therefore rustproof and very economical.
|
The Nylon Toggle? is made of resistant nylon with wings that expands behind the drywall. It is therefore rustproof and very economical.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
Simply taps into drywall, no pre-drilling, vibration resistant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The DrillerToggle? provides the holding power of a toggle bolt with the ease of installation of a WallDriller?. The toggle action supplies extra holding power in drywall, while its self-drilling tip eliminates all the extra hassles and messes of installing a regular toggle anchor. The DrillerToggle? fine centered point helps guide the anchor into the wall with a flawless precision. Its sharp cutting edge reduces the force required to cut the material and its powerful toggling mechanism holds tightly behind the drywall.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Corrosion resistant. It is internally threaded and it installs flush to surface.
|
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long.
|
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long.
|
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
|
|
