Home > HARDWARE > CONSTRUCTION HARDWARE > CEILINGS
Choose a sub category:
CEILING TILES/CEILING PANELS CEILING TILE HARDWARE
Sort By:
1
Professional 5010 Ceiling Lag Screw Set Professional TP05044 Lever Grid Leveling Clamp Professional TP05032 Acoustical Lag Driver
Eye lag screws are specifically designed for attaching ceiling grid hanger wire to any wood overhead. The hanger wire is threaded through the eye and twisted off before or after the eye lag screw is installed. Pre-drilling is recommended for the strongest attachment. Lever action grid clamps temporarily connect ceiling grid and firmly hold leveling line during the layout process. Each clamp is made from spring steel and is easy to operate with a single hand. Rubber tips on the clamps hold the grid and leveling line firmly in place without damaging the grid finish. This heavy-duty tool easily installs eye lag screws up to 4-1/2 in. long as well as self-tapping eye lags screws for metal. Overall length is 2.7 in and will fit any standard size chuck. Use with any drill or driver.
Professional 5110 Shadowline Edge Cutter Professional 5015 Ceiling Lag Screw Set Professional 5122 Ceiling Wire
The Shadowline cutter creates ideal Shadowline or reveal edges on ceiling tiles and acoustical panels. The one-piece all-steel design is comfortable to hold and use. This contractor-proven tool will not only make the most professional looking cuts possible. It will pay for itself on the first day by eliminating wasted tiles due to bad cuts. Blade changes and cutting depth are easily adjusted by hand with no additional tools required. Eye lag screws screw into wood ceiling joists to attach hanger wire for suspended ceilings. An eye lag screw is fashioned with an eye for threading the hanger wire and a lag thread on the other end for securing in the wood. Pre-drilling is recommended for the strongest attachment. Hanger wire is used to suspend ceiling grid main tees from the overhead structure. Designed for residential applications. The continuous 300 ft roll lets you cut the lengths you want with no waste.
Professional 5060 Grid Punch USG 207535 Hanger Wire Radar Professional R2310 Acoustical Square Edge Ceiling Panel
This grid punch is the most reliable and economical tool for preparing non-standard lengths of ceiling grid for fastening with rivets. Hardened pin will easily pierce 18 ga steel with little effort, allowing one-hand operation while freeing the other hand to hold the material steady. The tool's thin profile and deep throat makes punching holes into awkward and hard to reach corners possible. For optimum results place the steel cup firmly against the back of the material to be punched and squeeze with consistent pressure, bringing the pin into the material. The rubber tip on the punch will protect painted or coated finishes from being marred. USG DONN SDX/SDXL Hanger Wire, Specifications: Wood Handle, Galvanized, Dimensions: 6 ft Economical, medium-textured panels that feature a unique, non-directional pattern. They are made with a water-felted manufacturing process that provides excellent ceiling attenuation class (CAC) performance. Installs quickly and easily and are classified as low-emitting ceiling panels. 2 ft x 4 ft x 5/8 in.
Plateau Advantage 725 Acoustical Square Edge Ceiling Panel Fifth Avenue 280 Acoustical Square Edge Ceiling Panel USG Advantage Tivoli 4240 Tongue and Groove Ceiling Tile
Provides an attractive way to finish a ceiling. The mineral fiber panels have a square edge design for quick installation. A high light reflectance value. Cleans easily with a soft brush or vacuum. 2 ft x 4 ft x 9/16 in with a square edge. All-purpose and economical, Fifth Avenue??? acoustical ceiling panels that provide good acoustical properties. They clean easily with a soft brush or vacuum and are great options for fast food restaurants. Low-cost, wood fiber panels that are ideal when fire resistance, acoustical performance and accessibility are not significant considerations; offers simple staple-up installation that does not require a grid; tongue-and-groove edging on the tiles hides staples, delivering a smooth, clean, monolithic look; retail equivalent of Armstrong's Grenoble 258. 12 in x 12 in x 1/2 in with Staple Flange.
Stonehurst Economy 380 Acoustical Square Edge Ceiling Panel USG Advantage Custom 4290 Tongue and Groove Ceiling Tile Radar 829741 illusion Ceiling Panel
Provides a low-cost, attractive way to finish a ceiling; the mineral fiber panels install quickly and easily; ideal for renovations; retail equivalent of Armstrong's Plain White 280. 2' x 4' x 9/16" with a Square Edge. Low-cost, wood fiber panels; the ideal choice when fire resistance, acoustical performance and accessibility are not significant considerations; tongue-and-groove edging on the tiles hides staples for a smooth, clean, monolithic look; offers easy, staple-up installation without a grid; retail equivalent of Armstrong's Washable White 231. 12 in x 12 in x 1/2 in with Staple Flange. Face scores create the illusion of two 2 ft x 2 ft panels form one 2 ft x 4 ft panel. Non-directional pattern with a fresh, clean appearance offers fast and efficient installation. Economical, all-purpose ceiling pattern.
Radar Professional R2120 Acoustical Tapered Edge Ceiling Panel Fifth Avenue 220 Acoustical Square Edge Ceiling Panel Alpine Climaplus 821004 Acoustical Ceiling Panel
Quick and easy to install, these economical, all-purpose, medium-textured panels feature a unique, non-directional pattern. Radar basic acoustical ceiling panels are easy to clean with good sound absorption. Radar basic acoustical ceiling panels are made with a water-felted manufacturing process that provides excellent Ceiling Attenuation Class (CAC) performance. They install quickly and easily and are classified as low-emitting ceiling panels. Excellent, all-purpose, economical panels manufactured with a water-felted manufacturing process that provides good acoustical properties. Cleans easily with a soft brush or vacuum. 2 ft x 4 ft x 5/8 in with a square edge. Durable and medium-textured panel that offers good sound absorption properties. Reduces eyestrain while minimizing energy costs. Install easy and their surfaces wipe clean for easy maintenance. 2 ft x 2 ft x 5/8 in.
Donn Dx SDX216 Cross Tee CEILING PNL TABARET 2X4X5/8IN Donn Dx SDX24 Main Tee
DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance. TABARET acoustical ceiling panels are medium-textured, fiberglass panels with a washable vinyl face for easy maintenance. Offers sound control performance by providing high sound absorption. Lightweight, fiberglass basemat makes installation fast and easy. Panels include CLIMAPLUS performance to resist visible sag and protect against growth of mold and mildew. 2 ft x 4 ft x 5/8 in. DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance.
Donn Dx SDX424 Cross Tee Donn SM7 Wall Molding
DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance. DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance.
   
 
1