Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > LUBRICANTS & FLUIDS
Choose a sub category:
A/C COOLANT STARTER FLUID MOTOR OIL
MOTOR OIL ADDITIVES GEAR OILS TRANSMISSION FLUIDS
HYDRAULIC OIL OIL/FLUID CLEAN-UP GREASE
GREASE FITTINGS GREASE GUNS/ACCESSORIES DEGREASERS
OIL CANS BRAKE FLUIDS POWER STEERING FLUIDS
FUEL ADDITIVES WINDSHIELD FLUIDS/TREATMENTS ICE REMOVAL
SPECIALTY LUBRICANTS FUNNELS/MEASURES DRIP PANS / DRAIN PANS
Sort By:
1 2 3 ... 12
Rhinogear 5007 Small Funnel 4-3/4 in H x 4.38 in W x 3.88 in D STP 78572 All Season Water Remover Heel 28201 Gas Line Anti-Freeze
Made of tough, high-density polyethylene for dispensing petroleum-based fluids. May be used with multiple substances such as oil, radiator fluid or fuel additives. This concentrated fuel treatment helps maintain optimum performance all year round. It works to fight rust and corrosion while removing condensation in warm weather and helps prevent fuel line freeze. Additives and methanol formula safe for use in all 4-cycle engines. Prevents gas-line freeze-up, rust and corrosion year round. Removes water from fuel system, absorbs moisture in carburetor. Improves engine performance for year-round quick starts. Safe on catalytic converters and fuel injectors. 1 bottle treats up to 10 gal.
STP 78571 Fuel Injector and Carburetor Treatment STP 00203 Brake Fluid Hopkins 5034 Super Funnel
Without cleaning, deposits can lead to hard starts, lost acceleration and rough idling. STP? fuel injector and carburetor treatment is specially formulated to maintain clean performance of fuel injectors and carburetors by helping to prevent the accumulation of deposits. It's made with jet fuel, a high-quality carrier of active ingredients. STP? heavy-duty brake fluid DOT 3 is specially formulated to coax optimum performance out of disc or drum brake systems in today's cars and trucks. May be used with multiple substances such as oil, radiator fluid or fuel additives. One-piece tapered, tough, high-density polyethylene for hard-to-reach spots.
Bell V500 Lock Lubricant Thaw De-Icer Rain-X 800002242/RX11112 Original Glass Treatment Permatex 80345 Grease
SubZero? and Victor? Lock De-Icer? and Lubricant thaws frozen locks while lubricating the lock cylinder preventing damage to the lock mechanism. Works great on car doors, ski racks, luggage, padlocks, home and garage doors, mailboxes and more. Dramatically improves wet weather driving visibility, with and without wipers. Repels rain, sleet and snow, frost, salt, mud, bugs and grime. Permatex white lithium grease is a liquid aerosol lubricating paste designed to reduce friction between load bearing moving metal surfaces and/or the combination of metal and plastic surfaces. The product also protects metal surfaces from corrosion.
Gumout 800001370 Gas Treatment STP 66046 Power Steering and Stop Leak Blaster PB50 Lubricant
Helps to prevent deposit build up, fight rust and corrosion and remove water to help reduce gas line freeze. Use with up to 21 gal of gasoline every fill up. STP? power steering fluid and stop leak is specially formulated for vehicles over 75,000 miles to stop or reduce fluid loss caused by seals that leak due to wear or shrinkage (not for use with broken or scored seals). This treatment helps stop most wear and shrinkage levels. Can be used instead of regular power steering fluid as preventive maintenance. Compatible with all approved power steering fluids. B'laster Multi-purpose lubricant is a high-performance formula designed to lubricate moving parts in and around the house such as window tracks, hinges, chains, glides and gears. Formulated with Teflon? fluoropolymer to help reduce friction and wear, enhance performance and protect surfaces. It outperforms leading competitors and prevents rust and further corrosion on car parts, fishing reels and tackle, all tools, firearms, sports equipment, marine applications and more.
Prestone AS-400P Brake Fluid Solder Seal Gunk M516 Anti-Freeze Windshield Washer Fluid Gumout 800001706 Octane Booster
Prestone? DOT 3 synthetic hi-temp brake fluid is designed to provide an extra margin of boiling point protection. The mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor. This delivers braking power when needed by avoiding a spongy pedal. Both wet and dry boiling points exceed the minimum government standards. A comprehensive inhibitor package protects vital brake system metals. Concentrated formula designed to protect windshield washer systems from damage caused by temperatures as low as 25 deg F. Great for all season use when diluted as directed. Makes 8 gal. Helps stop knocks and pings, boost octane rating. Use with up to 15 gal of gasoline every fill up.
Lubrimatic 05-037 Gun Injector Needle Nozzle Honeywell AS-262 Power Steering Fluid STP 78573 Gas Treatment
Lubricates in very tight places like universal joints and sealed bearings. Stainless steel 18 ga x 1-1/2 in long needle. Equipped with standard grease fitting and protective plastic holder. For hand-operated grease guns only. One treatment stops or reduces most fluid loss caused by leaky seals. Conditioners revitalize dried, shrunken and hardened seals. Mixes with all approved power steering fluid and should be used for preventative maintenance. Meets requirements for GM, Ford, Chrysler, AMC and most foreign cars. STP? gas treatment improves the quality of gas by adding powerful cleaning agents that help fight the accumulation of harmful carbon, gum and varnish deposits in the fuel system that can reduce performance. Also engineered to remove water, which can lead to fuel line freeze. This product is made with jet fuel, a high-quality carrier of active ingredients.
Gumout 5072866 Instant Starting Fluid Lubrimatic 05-031 Standard Jaw Curved Grease Gun Coupler Hopkins 5068 Funnel Set
Engines need the right conditions to perform properly. If temperatures drop too low, gasoline can have problems evaporating, making it harder to burn. Extreme humidity can also have an effect on fuel's performance. Gumout? starting fluid helps engines start in all types of extreme weather, while conditioning fuel and engine parts to prevent friction and corrosion. For hand-operated lube equipment only. 4500 psi recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8 in NPT threads. Made of tough, high-density polyethylene for dispensing petroleum-based fluids. May be used with substances such as oil, radiator fluid or fuel additives. Includes one each: gray 1/2 pt, charcoal 1 pt and black 2 qt.
Gumout 800001363 Fuel Injector Cleaner STP 66079/ST-1014 Performance Oil Treatment Solder Seal Gunk M2713 Power Steering Fluid with Stop Leak
Designed for high mileage vehicles. Helps clean fuel injectors, intake valves and prevent future deposit buildup. Use every 3000 miles. Treats up to 21 gal. This high-viscosity formula is specially formulated to help fight metal-to-metal friction and protect your engine by providing a thicker cushion between moving engine parts. Stops leaks, revitalizes old seals, prevents wear, foam and oxidation. In a plastic bottle.
Radiator Specialty M2312 Gas Treatment Prestone AS-242 Windshield De-icer STP 78575 Super Fuel Injector Cleaner
Helps clean entire fuel system, reduces intake valve deposits, increases fuel economy, removes water, fight gas line freeze. One plastic bottle treats one tank, use in every tank for maintenance. Prevents refreezing and smearing. A concentrated formula with a high powered propellant for windows, locks and wipers. STP? super concentrated fuel injector cleaner contains concentrated detergents that help dissolve and remove harmful carbon, gum and varnish deposits on fuel injectors. Without cleaning, deposits can lead to hard starts, lost acceleration and rough idling. This product is made with jet fuel, a high-quality carrier of active ingredients.
3-in-One 10035 Oil Permatex 77134 Anti-Seize Lubricant 3-IN-ONE 120015 Fast Acting Penetrant
Blend of 3 oils that lubricate, clean, protect, and prevent rust. Use on locks, sliding doors, hinges, sewing machines, fans, window tracks, in saw blade cutting, on scissors, drawers, sports and recreation equipment and on the job for small motors. Permatex? Nickel anti-seize lubricant is a high-temperature, high-quality, heavy-duty lubricant that resists galling and corrosion and reduces wear in heavy pressure applications. It contains tenacious metals, oils and graphite materials that cannot be burned away or removed by slow moving parts. It is recommended for use where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys. Marksman spout for easy precision application. Fast acting. Quickly breaks bonds that hold rusted parts together. Prevents rust.
   
 
1 2 3 ... 12