|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold MetalTech coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in.
|
For exterior scaffolding. Meets ANSI, CSA and OSHA standards.1-1/2 x 3 in
|
Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1.625 in. tube O.D. frames. Meets OSHA standards for safety.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Disposable liner for use with AC27-P paint cup SKU# 631.6558. Includes 4 liners.
|
Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant.
|
Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable all steel construction. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks or 2" x 4" planks as specified.
|
Designed to snap over extension ladder rail end caps. Resists paints, stains, thinners and solvents. Flexible, fits all single and extension fiberglass and aluminum ladders (except 7500, D7500, 500 and D500) extension ladders, protects support surfaces from dents and scratches.
|
For trim painting and cut-in applications. Built-in magnet to secure a paint brush. Can be used with disposable paint cup liner AC27-L SKU# 631.6590. For use on ladders that include Lock-In System sockets such as the Job Caddy (SKU# 304.3304), Utility Bucket (SKU# 304.3296), or Job Bucket (SKU# 241.1080).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable all steel construction with 10" platform. 10" to fit pitch on most roofs. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 10" planks.
|
Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified.
|
Durable all steel construction. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks or 2" x 4" planks as specified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable all steel construction with 6" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks.
|
Great step up for in the kitchen, bathroom, etc.
|
Meets ANSI, CSA and OSHA standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets ANSI, CSA and OSHA standards.
|
Will not dent or rust. Bottom pads help prevent stool from slipping, protect floors. Holds up to 300 pounds. Size: 12-1/2" x 15-1/2" x 9- 1/4" high.
|
Will not dent or rust. Bottom pads help prevent stool from slipping, protect floors. Holds up to 300 pounds. Size: 12-1/2" x 15-1/2" x 9- 1/4" high.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For Sku# 879.5478 scaffold. 5" Dia. x 1-1/4" W. Rubber wheel. Pin not included. 303 lb. load capacity.
|
Fits any standard size ladder to prevent damage to support surfaces. Tough urethane resists tearing and weathering. Made in the USA.
|
Rugged construction. Spill-Proof. Easy to keep clean. Automatically closes with stepladder. Built-in rag rack. Fits fiberglass stepladders and aluminum 400 Series stepladders. Black color. Universal auto closing pail shelf, mounting hardware and instructions included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rugged construction. Spill-Proof. Built-in rag rack. Two piece yellow molded plastic pail shelf with aluminum arms. Works with Werner fiberglass stepladders and aluminum 400 Series ladders. Universal pail shelf, mounting hardware and instructions included.
|
Compatible with OBEL00, OBPT00, OBCN00 and 6200 series. Increase the work space on your ladder, sturdy lug and socket feature for seamless installation.
|
With plate (hollow). Meets ANSI, CSA and OSHA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight, all-plastic design. Legs lock into position; "locked" indicator is visible on top. Folds to 3-3/8" for compact storage. Top side walls help prevent accidental slipping. Convenient handle for carrying ease. Weight capacity - 200 pounds. Dimensions: Open - 10"H x 16.25"W x 11.25"D. Folded - 3.38"H x 20.13"W x 11.25"D.
|
Wrap around top ears for top protection. Outside galvanized steel spreaders. Knee Braces on bottom step. Outside washers. Bottom of front steps fully rodded through slots. Steps spaced evenly - 9" apart. High quality finished rails with eased edges. Rail ends are angle cut for full ground contact. Blind bore back legs with 1 rear rectangular horizontal. Dimensions: Front Rails 25/32" x 2-5/8"; Back legs 25/32" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Steps 3/4" x 3-1/4"; Rear Horizontals 3/4" x 2-1/2".
|
Meets ANSI, CSA and OSHA standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rectangular. For aluminum ladders of all duty ratings and fiberglass ladders with side rails up to 3"H x 1-3/16"W. Also fits Articulated ladder in scaffold or stairway use. Mar-resistant rubber caps protect work surface. Fits aluminum series extension ladders with rails up to 3-5/16" x 1-3/16", D716, D1100, D1200, D1300, D1500, D500 (20' to 24'), M and M1 Multi-Master ladders. Includes paint can hook, mounting hardware and instructions.
|
Gray powder coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. Lightweight and easy to carry. Highest standing: 18-1/2"; Step size: 15 L x 10-1/4"W; Open Size: 38-1/2"H x 19-1/4"W x 20"D; Closed Size: 42-1/2" H x 19-1/4" W x 3" D.
|
Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in. O.D. galvanized steel tube, 16 ga. Weather Resistant. Meets ANSI, OSHA and CSA standard.
|
|
|
