|
|
|
|
|
|
|
|
|
|
|
|
|
|
For building, window, door and construction joints, sealing around baseboards and trim. Should only be used where moderate joint movement is anticipated. Permanent color. Paintable. UV resistant. Non-yellowing.
|
Use around windows and door and similar areas for sealing out the elements and increasing energy efficiency. Provides good adhesion on most common construction surfaces. Paintable.
|
Toolable in all climates. No afterflow. Minimal shrinkage. Paintable. Resists cracking. Good adhesion. Flexible.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use on masonry painted and unpainted wood and most sidings, paintable, water clean-up
|
Toolable in all climates. No afterflow. Minimal shrinkage. Paintable. Resist cracking. Cured sealant is mildew resistant. Exceeds ASTM C834.
|
For building, window, door and construction joints, sealing around baseboards and trim and kitchens. Should only be used where moderate joint movement is anticipated. Permanent color. Paintable. UV resistant. Non-yellowing. Mildew resistant. Meets ASTM C-834.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Half barrel support. Blue. Thrust ratio: 15:1.
|
Use to help increase energy efficiency by reducing drafts and cold spots. Provides a barrier to the entry of dirt, insects and other pest. Mildew resistant. Adheres to most surfaces. 35 year durability. Meets requirements of ASTM C834-05.
|
Use on window and door frames, siding, trim, baseboards, ducts, subfloors, countertops, sinks, bathtubs, and vents. Provides the maximum level of adhesion. Mold and mildew resistant. Flexible. Paintable. SPEC230 performance. HomeShield antimicrobial protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use on window and door frames, siding, trim, baseboards, ducts, subfloors, countertops, sinks, bathtubs, and vents. Provides the maximum level of adhesion. Mold and mildew resistant. Flexible. Paintable. SPEC230 performance. HomeShield antimicrobial protection.
|
For projects that require painting shortly after caulk application. For windows, doors, and trim. Paintable in 40 minutes. Caulk forms a tough outer skin that's dry enough to paint over with latex- or oil-based paint. Resilient seal is designed to prevent air and moisture from passing through cracks and joints. Provides flexibility to resist expansion and contraction without cracking.
|
All steel construction. Thumb control flow stop. Recommended for light consistency caulks and sealants. 3:1 thrust ratio.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For building, window, door and construction joints, sealing around baseboards and trim and kitchens. Should only be used where moderate joint movement is anticipated. Permanent color. Paintable. UV resistant. Non-yellowing. Mildew resistant. Meets ASTM C-834.
|
Poly foam caulk savers are used behind caulks to fill wide cracks and save on caulk.
|
Seals cracks. Will not harden, chip or peel. Can be used indoors and outdoors. Paintable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Puncture wire, spout cutter, and ladder hook. Gun weight: 494 grams. 1/10 gallon. Black. Thrust ratio: 17:1.
|
Use for gluing loose molding or tiles, securing backsplashes, setting sinks and even repairing or concealing small cracks in plaster, drywall or around molding and baseboards. Can help lower energy cost by sealing air leaks around windows and doors and other utility and plumbing penetrations. Bonds to almost any surface including wood, concrete, metal, ceramic, drywall, plaster and much more. Environmentally safe. Soap and water clean-up. Low odor. Remains flexible. Cured caulk will resist mold and mildew growth. Weather-resistant seal. Paintable..
|
A styrenated siliconized acrylic caulk specially formulated for the paint contractor, paintable in just 30 minutes. Higher solids reduce shrinkage. Adheres to most surfaces, water clean-up.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For building, window, door and construction joints, glazing on aluminum frames, sealing in sanitary rooms, kitchens, cold storage rooms, containers and air conditioning systems. Should only be used where moderate joint movement is anticipated. Permanent color. UV resistant. Mildew resistant. Stays fully elastic after curing. Typical acetic smell Meets ASTM C-834.
|
For building, window, door and construction joints, glazing on aluminum frames, sealing in sanitary rooms, kitchens, cold storage rooms, containers and air conditioning systems. Should only be used where moderate joint movement is anticipated. Permanent color. UV resistant. Mildew resistant. Stays fully elastic after curing. Typical acetic smell Meets ASTM C-834.
|
Use to seal cracks and gaps that are found around doors, baseboards and walls, molding, windows and wall joints. Can be used for less-demanding outdoor projects. Mold and mildew resistant. Extrudes approximately 30 ft. when using a 1/4" bead.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to provide a protective water tight seal around tubs, showers, sinks and fixtures. Odorless. Mildew resistant formula. Paintable. Durable seal remains flexible.
|
Non-absorbent, closed-cell polyethylene pre-caulking material helps repel moisture. Use before caulking to fill gaps and openings larger than 1/2" x 1/2". Prevents 3-point bonding.
|
With silicone for extra adhesion. Provides a weather-resistant, flexible seal against air, moisture, dirt, dust and insects. Adheres to wood, brick, vinyl, aluminum, painted surfaces, metal, plaster, drywall, cement/concrete and ceramic. Use around windows, doors and baseboards. Stays flexible, will not crack. Easy to use, soap and water cleanup. Paintable and mildew resistant. 1/4" round bead covers approximately 30 lin. ft and 1/8" round bead covers approximately 122 lin. ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forms a flexible seal inside or outside. Requires no tools. Easy to apply.
|
No mess, trims excess caulk for professional results. Smooth finishes and seals bead of caulk. Reseals cartridge for storage and reuse.
|
Poly foam caulk savers are used behind caulks to fill wide cracks and save on caulk.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 inch ratcheting no-drip caulk gun. With puncture wire, spout cutter and ladder hook.
|
Non-absorbent, closed-cell polyethylene pre-caulking material helps repel moisture. Use before caulking to fill gaps and openings larger than 1/2" x 1/2". Prevents 3-point bonding.
|
Fills, air-seals and insulates small gaps up to 1 inch inside or out. Expands to take the shape of cracks and voids to form a durable, airtight, and water-resistant bond that eliminates unwanted airflow and helps reduce condensation. Forms a permanent weather-tight seal to minimize drafts and insect infestation. Tack free in 15 minutes. Trims in 30-60 minutes. Foam elasticity allows for movement/shifting within a structure. Cream colored foam cures rigid. Paintable, stainable and sandable. All-direction dispensing. UL Classified.
|
|
|
